Controls; Switching The Appliance On; Operating Tips; Set The Language - Thermador T24IR Serie Manual De Uso

Controls

A
On/Off button
Serves to switch the whole appliance on and off.
B
Alarm button
Used to switch off the warning signal, see chapter
"Alarm function".
C
"super" button (refrigerator compartment)
Switches super cooling on and off.
D
Display panel
The temperatures in the refrigerator compartment
are shown in the display panel. Activated special
functions are shown via "symbol".
The menus and setting options which are available
are represented on the display panel in the setup
mode, see chapter "Setup mode".
E
Selection buttons
The temperature setting is activated using
the selection buttons, see chapter "Setting
the temperature".
For selecting a menu in the setup mode,
see chapter "Special functions".
F
Setting buttons
The temperature can be changed using the setting
buttons, see chapter "Setting the temperature".
More settings can be selected in the setup mode,
see chapter "Special functions".
G
"setup" button
This button starts and ends the setup mode.
If the setup mode is ended using the setup button,
the changes which have been made are stored.
H
Vacation button
Is used to switch vacation mode on and off,
see chapter "Special functions", section "Vacation
mode".
Note:
A sound can be heard every time a button is actuated
if this function is activated in the sound menu during
the setup mode.
Symbols in the display field
Super cooling is activated (see chapter
"Super cooling").
Holiday mode is activated, see chapter
Special functions.
A warning message is displayed,
see chapter Alarm function.

Switching the appliance on

Switch on the appliance with the On/Off button.
The appliance begins to cool. Light is switched on
when the door is open.
,
CAUTION:
Keep hands and fingers away from front and rear
openings of the refrigerator door when closing.
Risk of injury to hands or fingers.
Never allow children to climb on or play with
the refrigerator door.

Operating tips

When the appliance has been switched on, it may
■
take several hours until the set temperature has
been reached.
The fully automatic No Frost system ensures that
■
the refrigerator compartment remains free of ice.
Defrosting is not required.

Set the language

The display languages can be changed according
to the table in the chapter Setup mode.
In order to change the display language:
1. Press setup button.
2. Press the ¾ or ¿ setting button, until the set
language is displayed.
3. Press the @ or A setting button, until the desired
language is displayed.
4. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
en-us
7