COMPACT
EN
Fasten supports tightening nuts until
14
outside EPDM joint (Point 4) of equipment
is compressed, between 3 and 6 mm;
Important: To avoid water from filtering
inside cabin, check EPDM joint tightening
with Compact base, as indicated on
diagram.
3-6mm.
Cabin roof
Fasten selflocked nut until
EPDM gasket is compressed
between 3 and 6 mm.
14
Tighten (4) M8 nuts to support and (4) to
15
Unit base.
EPDM gasket
10 mm*
(*) (approx. after tightening)
Base
Support
28
Air conditioning for vehicles
Check compression
thickness using a
tape measure in the
four corners.
EPDM gasket
14
15