Disposal; Extension And Conversion; Warranty; Re-Ordering The Cd01-Pi - Aventics CD01-PI Instrucciones De Servicio

84 AVENTICS | CD01-PI | R412012449–BAL–001–AD

Disposal

4. Release and remove the two long mounting screws M5x80
(52), which are fastened by the T-shaped nuts (53).
5. Flip up the VS and loosen the tap-form screws (51)
on the DIN rail (54).
You have now detached the VS from the DIN rail.
9 Disposal
Careless disposal of the VS may lead to pollution of the
environment. Raw materials can then no longer be recycled.
Therefore dispose of the CD01-PI in accordance with the
national regulations in your country.

10 Extension and Conversion

10.1 Warranty

The AVENTICS warranty only applies to the delivered
configuration and extensions taken into account in the
configuration. The warranty no longer applies after a conversion
that exceeds these extensions.

10.2 Re-ordering the CD01-PI

Converting or extending changes the configuration of the device
on delivery. If you re-order the device by specifying the device
number on the VS name plate, we will deliver a device in the
original configuration.