Ec-Declaration Of Conformity; Symbols; Double Insulation - Dolmar AS-1212 Instrucciones De Manejo

EC-DECLARATION OF CONFORMITY

The undersigned, Junzo Asada and Reinhart Dörfelt, authorized
by DOLMAR GmbH, Jenfelder Str. 38, D-22045 Hamburg
declare that the battery-powered chain saw
Model AS-1212 (Serial No. : series production)
manufactured by DOLMAR GmbH in Germany is in compliance
with the following standards or standardized documents, HD400,
EN292, EN608, EN60204, EN55014 in accordance with Council
Directives, 89/336/EEC, 98/37EC and 73/23/EEC.
EC Type Examination Certificate was issued by: SEMKO AB,
Torshamnsgatan 43, Box 1103, S-164 22 KISTA, SWEDEN
EC Type Examination Certificate No.: MD102
Hamburg
For DOLMAR GmbH CE94
Junzo Asada
Managing Director
EC-DECLARATION OF CONFORMITY
The undersigned, Junzo Asada and Reinhart Dörfelt, authorized
by DOLMAR GmbH, Jenfelder Str. 38, D-22045 Hamburg
declare that the battery-powered chain saw
Model LG-125 (Serial No. : series production)
is in compliance with the following standards or standardized
documents, EN60335, EN55014, EN61000 in accordance with
Council Directives, 89/336/EEC, 98/37EC and 73/23/EEC.
Hamburg
For DOLMAR GmbH CE94
Junzo Asada
Managing Director
Noise and Vibration
Measured sound power level ; 90 dB
Guaranteed sound power level ; 94 dB
Measured according to Council Directive 2000/14/EC.
- Wear ear protection. -
The typical weighted root mean square acceleration
2
value is 6 m/s .
Measured according to pr EN50144-2-12.
10
Reinhart Dörfelt
Managing Director
Reinhart Dörfelt
Managing Director
Table of contents
EC-Declaration of conformity ............................................ 10
Symbols ............................................................................. 10
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE ................... 11
ADDITIONAL SAFETY RULES FOR CHAIN SAW ......... 11
Explanation of general view .............................................. 12
OPERATING INSTRUCTIONS
Installing or removing battery cartridge ............................. 12
Charging ............................................................................ 12
Installing or removing saw chain ....................................... 13
Lubrication ......................................................................... 14
Switch action ...................................................................... 14
Carrying tool ...................................................................... 14
Pruning trees ..................................................................... 15
Adjusting saw chain tension .............................................. 16
Maintenance ...................................................................... 16
Specifications ..................................................................... 17
Accessories ....................................................................... 17

Symbols

The followings show the symbols used for the tool. Be sure that
you understand their meaning before use.
Indoor use only
Read instruction manual.

DOUBLE INSULATION

Two handed use. The tool
is designed for right handed
use only.
Ready to charge
Charging
Charging complete
Delay charge (too hot battery)
Deffective battery