Tabla De Contenido; Eu Conformity Declaration; Packing - Dolmar PS-220 TH Manual De Instrucciones

ENGLISH
Thank you for purchasing a DOLMAR product!
Congratulations on choosing a DOLMAR chain saw! We are confident that you will be
satisfied with this modern piece of equipment.
The PS-220 TH/PS-221 TH/PS-222 TH (Tophandle) is a very light and handy chain
saw with the handle on the top. This model was developed especially for tree surgery
and care. Only persons who have completed training in working from elevated plat-
forms (cherry pickers, lifts), from platforms mounted on ladders or who are proficient
in climbing with ropes are permitted to operate this chain saw.
The automatic chain lubrication with variable-flow oil pump and maintenance-free
electronic ignition ensure trouble-free operation, while the hand-saving anti-vibration
system and ergonomic grips and controls make work easier, safer, and less tiring for
the user.
The safety features of the PS-220 TH/PS-221 TH/PS-222 TH are state of the art and
meet all German and international safety standards.
They include handguards on both grips, grip safety, chain catch, safety saw chain,
and chain brake. The chain brake can be actuated manually, and is also inertia-actu-
ated automatically in case of kickback.
In order to ensure the proper functioning and performance of your
new chain saw, and to safeguard your own personal safety, it is
imperative that you read this instruction manual thoroughly before
operation. Be especially careful to observe all safety precautions!
Failure to observe these precautions can lead to severe injury or
death!

EU Conformity Declaration

The undersigned, Shigeharu Kominami and Rainer Bergfeld, as authorized by,
declare that the DOLMAR machines,
Type: 023 EU prototype test certificate No.
PS-220 TH/PS-221 TH/PS-222 TH
manufactured by Makita Corporation, 3-11-8, Sumiyoshi-cho, Anjo, Aichi, Japan, con-
forms to the basic safety and health requirements of the applicable EU guidelines:
EU Machine guideline 98/37/EG,
EU EMC guideline 89/336/EWG (modified by 91/263/EWG, 92/31/EWG and 93/68/
EWG),
Noise emission 2000/14/EG.
The most important standards applied to properly meet the requirements of the
above EU guidelines were: EN 14982, EN ISO 11681-2, EN 61000-4-2, EN 61000-4-
3, CISPR 12.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The
measured noise level (Lwa) is 106 dB(A). The guaranteed noise level (Ld) is
107 dB(A).
The EG Type-Examination per 98/37/EG was performed by: TÜV Product Service
GmbH, Zertifizierstelle, Ridlerstr. 31, D-80339 Munich.
Hamburg, CE2004
For DOLMAR GmbH
Shigeharu Kominami
Managing Director
M6 04 10 24243 059
Rainer Bergfeld
Managing Director
Table of contents
EU Conformity Declaration.....................................................................................15
Packing.....................................................................................................................15
SAFETY PRECAUTIONS
General precautions ............................................................................................16
Protective equipment...........................................................................................16
Fuels / Refuelling.................................................................................................16
Putting into operation ..........................................................................................16
Kickback ..............................................................................................................16
Working behavior/Method of working ............................................................ 16-17
Transport and storage .........................................................................................17
Maintenance........................................................................................................17
First aid................................................................................................................17
Technical data..........................................................................................................17
Denomination of components................................................................................18
PUTTING INTO OPERATION
Mounting the guide bar and saw chain................................................................18
Tightening the saw chain.....................................................................................18
Chain brake .........................................................................................................18
Fuels / Refuelling........................................................................................... 18-19
Adjusting the chain lubrication.............................................................................19
Checking the chain lubrication ............................................................................19
Starting the engine ..............................................................................................19
Cold start .............................................................................................................19
Warm start...........................................................................................................19
Stopping the engine ............................................................................................19
Checking the chain brake ....................................................................................19
Adjusting the carburetor ........................................................................................19
MAINTENANCE
Sharpening the saw chain ...................................................................................20
Cleaning the guide bar, lubricating the sprocket nose.........................................20
Replacing the saw chain......................................................................................20
Replacing the suction head .................................................................................20
Cleaning the air filter ...........................................................................................20
Replacing the spark plug.....................................................................................20
Cleaning the muffler ............................................................................................20
Cleaning the cylinder space ................................................................................20
Instructions for periodic maintenance..................................................................21
Service, spare parts and guarantee ......................................................................21
Trouble shooting .....................................................................................................22

Packing

Your DOLMAR chain saw will be delivered in a protective cardboard box to prevent
transport damage.
Cardboard is a basic raw material and is consequently reuse-able or suitable for recy-
cling (waste paper recycling).
15
Page
RE Y