After Finishing Work; Transporting; Transporting The Hedge Trimmer; Storing - Stihl HSA 94 R Manual De Instrucciones

11 After Finishing Work

► Walk slowly and steadily forwards.
► Swing the hedge trimmer from the bottom upwards in an
arc while making the cut.
► Cut the other side of the hedge in the same way.
► Hold the cutting blades at an angle of 0° to 10° to the top
of the hedge.
► Swing the hedge trimmer horizontally and in an arc while
making the cut.
► If cutting performance deteriorates: Sharpen the cutting
blades.
11 After Finishing Work
11.1 After Finishing Work
► Switch off the hedge trimmer, move retaining latch to
position
and pull the connecting cable plug out of the socket.
► If the hedge trimmer is wet: Allow the hedge trimmer to
dry.
► Clean the hedge trimmer.
► Clean the cutting blades.
► Fit the blade scabbard so that it completely covers the
cutting blades.

12 Transporting

12.1 Transporting the Hedge Trimmer

► Switch off the hedge trimmer, move retaining latch to
position and pull the connecting cable plug out of the
socket.
► Fit the blade scabbard so that it completely covers the
cutting blades.
► Carry the hedge trimmer by the loop handle with the
cutting blades behind you.
► Transporting the hedge trimmer in a vehicle: Secure the
hedge trimmer to prevent turnover and movement.
0458-722-9821-B

13 Storing

13.1 Storing the Hedge Trimmer

► Switch off the hedge trimmer, move retaining latch to
position
and pull the connecting cable plug out of the socket.
► Fit the blade scabbard so that it completely covers the
cutting blades.
► Observe the following points when storing the hedge
trimmer:
– Hedge trimmer is out of the reach of children.
– Hedge trimmer is clean and dry.

14 Cleaning

14.1 Cleaning the Hedge Trimmer

► Switch off the hedge trimmer, move retaining latch to
position
and pull the connecting cable plug out of the socket.
► Clean the hedge trimmer with a damp cloth or STIHL resin
solvent.

14.2 Cleaning the Cutting Blades

► Switch off the hedge trimmer, move retaining latch to
position
and pull the connecting cable plug out of the socket.
► Spray both sides of blades with STIHL resin solvent.
► Insert the connecting cable plug.
► Run the hedge trimmer for 5 seconds, .
The cutting blades run. STIHL resin solvent is distributed
evenly.
English
45