Rotating The Control Handle; Selecting Power Level; Cutting - Stihl HSA 94 R Manual De Instrucciones

English

10.2 Rotating the Control Handle

The control handle can be rotated to any one of three
positions to suit the application.
2
► Push the retaining latch (1) with your thumb to position
.
► Pull out and hold the handle lock (2).
► Rotate the control handle (3) clockwise or
counterclockwise.
► Release the handle lock (2).
► Continue to rotate the control handle (3) clockwise or
counterclockwise until it engages in position.

10.3 Selecting Power Level

One of three power levels can be selected to suit the
application. The LEDs indicate the selected power level. The
higher the power level, the faster the cutting attachment can
run.
The selected power level affects the battery's runtime. The
lower the power level, the longer the runtime.
44
1
3
1
► Push the retaining latch (1) with your thumb to position
The LEDs indicate the selected power level.
► Push the retaining latch (1) forwards and allow it to spring
back.
This selects the next power level. Power level 3 is followed
by power level 1, then 2, 3, etc.
► Push the retaining latch (1) forwards and allow it to spring
back as many times as necessary to select the required
power level.

10.4 Cutting

► Use lopping shears or a chainsaw to cut out thick
branches first.
► Swing the hedge trimmer from the bottom upwards in an
arc while making the cut.
► Lower the nose of the hedge trimmer without cutting.
10 Operating the Hedge Trimmer
0458-722-9821-B
.