Bushnell TROPHY CAM HD 119874 Manual De Instrucciones página 21

Parameter
Camera Name
Video Size
(only affects
video clips in
Video or Hybrid
modes)
Interval
Settings
(Bold=default)
(Default=
"TROPHY
CAM")
See "Using the
Setup Menu Input
Screens"
1280x720,
1920x1080,
640x360
10S (second)
default, with a
60M (minute) to
.6S (half second)
range of settings
available.
(60M-1M are set
in one minute
increments,
59S-3S are set
in one second
increments,
followed by the
.6S setting)
Description
Allows the user to set a custom name for the
camera. Useful for ID purposes when multiple
cameras are setup, since each camera will
imprint its name on all photos (but not videos)
it captures.
Selects video resolution (in pixels per frame).
Higher resolution produces better quality
videos, but creates larger files that take up
more of the SD card capacity (fills up faster).
640x360 is VGA video in "widescreen" 16:9
format. The highest setting provides HD video.
Using high speed SD cards (SanDisk
class 6 or higher) is recommended if you
will use the 1280x720 or 1920x1080 video
settings.
Selects the length of time that the camera
will "wait" until it responds to any additional
triggers from the PIR after an animal is first
detected and remains within the sensor's
range. During this user set "ignore triggers"
interval, the camera will not capture photos/
videos. This prevents the card from filling up
with too many redundant images. Settings
begin with 10 second default when parameter
is first selected. Setting the Interval time to
.6 second will capture the maximum # of
images, but some may appear "washed
out" if animal is too close to camera at
night. Note: after setting down past ".6S", settings
start over at "60M".
SDHC
®
21