Optional Accessories; Choosing An Installation Site - Daikin FFQ09Q2VJU Manual De Instalación

Optional Accessories

The optional decoration panel and remote controller are required for this indoor unit.
Table 1
Optional decoration panel
Type A BYFQ60B3W1
Type B BYFQ60C2W1W Color: White
Type B BYFQ60C2W1S
There are 2 types of remote controllers: wired and wireless. Select a remote controller from Table 2 according to customer
request and install in an appropriate place.
Table 2
Remote controller type
Wired type
Wireless type
If you wish to use a remote controller that is not listed in Table 2, select a suitable remote controller after consulting catalogs and
technical materials.

Choosing an Installation Site

Hold the unit by the 4 hanger brackets when opening the box and moving it, and do not exert pressure on to any other part, piping
(refrigerant, drain, etc.), or plastic parts.
If the temperature or humidity inside the ceiling might rise above 86°F (30°C) or RH 80%, respectively, add extra insulation to the
unit.
air outlet (s).
Before choosing the installation site, obtain user approval.
The indoor unit should be positioned in a place where:
1) both the air inlet and air outlet are unobstructed,
2) the unit is not exposed to direct sunlight,
3) the unit is away from the source of heat or steam,
4) there is no source of machine oil vapor (this may shorten the indoor unit service life),
5) cool/warm air is circulated throughout the room,
6)
controller range,
7) no laundry equipment is nearby,
8) drainage can be performed without any problem,
9) the weight of the indoor unit can be adequately supported,
10)
11) room can be left for installation and service work,
12)
13)
came with the outdoor unit for details).
English
Color: White
Color: Silver
Heat Pump type
BRC082A41W / BRC082A42W / BRC082A42S
4