Configuring various functions (Setup menu)
You can configure the unit's various functions.
POP-UP MENU
Cursor keys
B / C / D / E
ENTER
SETUP
SETUP
1
Press SETUP.
Setup
¡Network¡Setup
2
Use the cursor keys (B / C) to select a menu.
Setup
¡Max¡Volume
3
Press ENTER.
Max Vol
¡¡
4
Use the cursor keys (D / E) to select a setting
and press ENTER.
y
To return to the previous state during menu operations, press
RETURN.
5
Exit from the menu, press SETUP.
HOME
NOW PLAYING
ENTER
RETURN
RETURN
MUTE
VOLUME
SP A
SP A
SP A
•••••Max
Setup menu items
Menu item
Displays the network
Information
information on the unit.
Configures the network
parameters (such as IP
IP Address
address).
Filter Sets the MAC address
filter to limit access to the
MAC Filter
unit from other network
devices.
Selects whether to allow a
DLNA-compatible Digital
Network
DMC Control
Media Controller (DMC) to
Setup
control playback.
Selects whether to enable/
disable the function that turns
Net Standby
on the unit from other
network devices.
Edits the network name (the
unit's name on the network)
Network Name
displayed on other network
devices.
Updates the firmware via the
Update
network.
Adjusting the high and low
Tone Control
frequency response.
Adjusting the sound output
balance of the left and right
Balance
speakers.
Sets the maximum volume to
Max Volume
prevent excessive loudness.
Sets the initial volume for
when this receiver is turned
Initial Volume
on.
Selects how to supply power
DC OUT
through the DC OUT jack.
Function
Page
34
34
34
34
34
35
35
35
35
35
35
35
33
En