List Of Parts And Equipment Included - Pioneer PDK-FS05 Manual De Instrucciones

List of parts and equipment included

Be sure to check that all the parts and equipment listed below have been included before beginning to assemble your stand.
• Note that a Philips screwdriver (not included) is required for assembly.
• Center support column x1
• Glass panel x1
Caution
The glass panel should be kept in its
packing box until you are ready to attach it
to the stand to guard against breakage.
• Long support legs x2
(Please refer to the table for Procedure 3 on page 11 for usage.)
• Short hexagonal bolts (M8 x 16 mm: black) x12
• Middle hexagonal bolts (M8 x 35 mm: black) x4
• Long hexagonal bolts (M8 x 60 mm: silver) x2
10
En
• Base x1
• Glass stays
(x2, one left and one right)
• Short support legs x2
• Hexagonal wrench x1
(Opposite side 6 mm for M8 use)
• Screws (M4 x 7 mm: silver) x4
• Screws (M4 x 10 mm: black) x2
• PDP bracket x1
• Support column covers
(x2, one left and one right)
• Cap x1
• Cable cover x1
(for attachment to
support column)
• Cable clamps x4
• Operating instructions
(This document) x1
フローティングスタンド
Floor stand
Support de base
Bodenständer
Supporto per display
Vloerstandaard
Soporte para colocar en el suelo
PDK-FS05
取扱説明書
Operating instructions
Mode d'emploi
Bedienungsanleitung
Istruzioni per l'uso
Gebruiksaanwijzing
Manual de instrucciones ucciones