Installation And Assembly Instructions - Pioneer PDK-FS05 Manual De Instrucciones

Installation and assembly instructions

1
Slide center support column into brackets on the
base and use short hexagonal bolts to fix it into
place (4 locations).
Center support column
Short hexagonal bolts
(M8 x 16 mm: black)
Base
2
Use short hexagonal bolts to attach PDP bracket to
center support column (bolts must be screwed in
four locations).
The bracket may be screwed into the upper holes, middle
holes, or lower holes of the center support column to adjust
the height of the display. The middle holes are designed to be
used for standard installation.
Short hexagonal bolts
(M8 x 16 mm: black)
Slide grooves
into place
Slide into
brackets
PDP bracket
(Stand shown below is a 43-inch display stand)
Locations of holes on center support column for attach-
ment of PDP bracket
Upper
holes
Middle
holes
Lower
holes
3
Attach the long support legs or short support legs
to the PDP bracket with the short hexagonal bolts (4
locations).
Table of parts included with each plasma display
PDP-506XDE
Plasma Display PDP-506FDE
PDP-506HDG
Location of speaker
Support legs attachment
method
Short ×2
Support legs
Plasma display
attachment use
Middle ×2
top hexagonal
Used
bolts
parts
Plasma display
attachment use
Middle ×2
bottom hexagonal
bolts
Long ×2
Support legs
Unused
parts
Long ×2
Hexagonal bolts
Note
Be sure to carefully store the unused support legs, the bolts,
the hexagonal wrench, and the Operating Instructions together.
A
When installing speakers at the sides of the plasma
display
Use the short support legs.
Use the hexagonal wrench included with the stand to do so.
Short support legs
Short hexagonal bolts
(M8 × 16 mm: black)
Short support
legs
Slide grooves
into place
PDP bracket
Upper
holes
Middle
holes
Lower
holes
PDP-436XDE
One body type
PDP-436FDE
plasma display
PDP-436HDG
Side Side Under
A A B B
Short ×2 Long ×2 Long ×2
Middle ×2 Middle ×2 Long ×2
Middle ×2 Middle ×2 Middle ×2
Long ×2 Short ×2 Short ×2
Long ×2 Long ×2 Middle ×2
–
11
En