Dirna Bycool FLAT Instrucciones De Montaje página 18

FLAT
EN
ES
Place the tank and the support in the most
1
appropriate section and mark the (4) end
attachment boreholes (a). Make the Ø9
boreholes and position (4) M6 wide-rimmed
rivet nuts.
Fijar soporte c/(4)tornillos 6/100x25 y (4)
2
arandelas planas de Ø6 ala ancha.
Secure the (2) belts to the support bores, with
3
(4) M5/80 self-locking nuts and (4) wide-
rimmed flat washers.
Assemble the filter in the tube with a stud,
4
introduce in the cap and connect to an X plastic
tube (return). Replace the cap on the tank.
WATER TANK INSTALLATION
OPERATIONS IN THE TANK
18
a
4
dirna
, s.a.
1
2
3
X