Storing Stations In Memory - JVC KD-HDR40 Manual De Instrucciones

Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
While listening to an HD Radio station...
[Hold]
The SET menu is called up.
[Turn] = [Press]
• Repeat this procedure.
Select "TUNER" = "BLEND HOLD"
= "AUTO/DIGITAL/ANALOG"
Lights up when holding the digital reception.
Flashes when holding the analog reception.
• If no sound can be heard with "AUTO," change the
setting to "ANALOG" or "DIGITAL."
• The setting automatically returns to "AUTO" in the
following cases:
– When you tune in to another broadcast.
– When you change to another source.
– When you turn off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the HOLD indicator flashes.
10

Storing stations in memory

You can preset up to 18 stations for FM and 6 stations
for AM.
• The HD Radio multicast channels can also be preset.
Automatic presetting — SSM (Strong-station
Sequential Memory)
1
While listening to a radio...
[Hold]
The SET menu is called up.
[Turn] = [Press]
• Repeat this procedure.
Select "TUNER" = "SSM"
2
Select the preset number range you want to
store.
[Turn]
• For FM: SSM 01–06 Ô SSM 07–12 Ô
SSM 13–18
• For AM: SSM 01–06
3
[Press]
Local stations with the strongest signals are
searched and stored automatically.
• To stop searching, press MENU.
To preset other 6 stations, repeat from step 1 again.