Storing Stations In Memory; Fm Station Automatic Preset: Ssm - JVC KD-SH77R Manual De Instrucciones

Ocultar thumbs Ver también para KD-SH77R:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 290
2
Press and hold ¢
"M" (manual) starts flashing on the
display.
3
Tune into a station you want while "M"
is flashing.
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing until you release the
button.
When an FM stereo broadcast is hard to
receive:
1 Press M/B (mode/band) to enter
the functions mode while listening
to an FM stereo broadcast.
2 Press MO (monaural), while still in
the functions mode, so that the
MO indicator lights up on the
display.
• Each time you press the button,
the MO indicator lights up and
goes off alternately.
Lights up when receiving
an FM broadcast in stereo.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator
goes off).
4 until
or
Press ¢
to tune
into stations of higher
frequencies.
4 to tune
Press
into stations of lower
frequencies.
The MO indicator lights
up.

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM
band (FM1, FM2 and FM3).
1
Select the FM band (FM1 – 3) you want
to store FM stations into.
1 Press SOURCE
2 If necessary, press and
FM 1
2
Press and hold both buttons for more
than 2 seconds.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons
— No. 1 (lowest frequency) to No. 6 (highest
frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
repeatedly to select FM.
hold M/B (mode/band)
for more than 1 second
repeatedly. Each time
you press and hold the
button, the FM band
changes as follows:
FM 2
FM 3
"SSM" appears, then
disappears when automatic
preset is over.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-sh55r

Tabla de contenido