Storing stations in memory
You can store the broadcasting stations in memory.
Storing stations manually
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
1
F M
2
3
1
2
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
3
2
Select the FM1 band.
Tune into a station of 88.3 MHz.
See page 4 to tune into a station.
Press and hold the button for more than 2
seconds.
1
LOUD
LOUD
LOUD
Preset number "1" flashes for a while.
POP
SOFT
BEAT
POP
SOFT
BEAT
POP
SOFT
BEAT
5