Let's Make Some Sounds; Basic Settings; Tuning - Korg ODYSSEY Manual De Usuario

ARP ODYSSEY ARP ODYSSEY Module

Basic settings

Set the ARP ODYSSEY's controls (sliders, switches, etc.) as shown in the illustration
below.
While you play the keyboard, gradually raise the VCO‐1 volume slider (blue) or
VCO‐2 volume slider (green); you'll hear the sound of a a sawtooth wave. Use the
VCA level slider (red) to adjust the volume.

Let's make some sounds

Tuning

After you've adjusted the basic
settings as described above, use
a commercially available tuner to
adjust the FREQUENCY COURSE
slider and FREQUENCY FINE
slider to the correct pitch.
- 16 -