Soehnle Professional 7871 Instrucciones De Uso página 12

3. FAULTS – – – – CAUSES AND REMEDIES 3. FAULTS 3. FAULTS 3. FAULTS CAUSES AND REMEDIES CAUSES AND REMEDIES CAUSES AND REMEDIES
DISPLAY DISPLAY
DISPLAY DISPLAY
If the fault cannot be cleared, or other error messages appear, please contact your service
partner.
www.soehnle-professional.com
CAUSES CAUSES
CAUSES CAUSES
The scales are not reset to >>0.0 kg<< when
switched on.
Underload: only dashes appear at the bottom
of the display field.
Overload: only dashes appear at the top of
the display field. Maximum weighing range is
exceeded.
The weighing platform does not stabilise.
The weighing platform does not stabilise.
REMEDY REME DY
REME REME DY DY
Unload the scales and restart the
display unit. If the error remains,
please contact your service partner.
Switch the display off and on again,
or pull out the mains plug. If the error
occurs again, please contact your
service partner.
Unload the scales, or switch them off
and on again. Check the maximum
weighing range.
Check the surface under the scales,
and check that the weighing platform
is level. If the error persists after
readjustment, please contact your
service partner.
Stand still, or stabilise the weight on
the scales.
12