Beurer medical FT 100 Instrucciones De Uso página 34

The temperature measurement unit flashes on the display (Fig. 6).
You can set the device to display the temperature in degrees Celsius (°C) or
degrees Fahrenheit (°F).
• To display the temperature in Celsius, select °C using the MODE/MEM but-
ton and confirm with the LIGhT/sET button.
• To display the temperature in Fahrenheit, select °F using the MODE/MEM
button and confirm with the LIGhT/sET button.
The acoustic signal symbol flashes on the display (Fig. 7).
You can activate/deactivate the acoustic signals (device activation, measure-
ment in progress, measurement completion).
• To activate the acoustic signals, use the MODE/MEM button to select
and confirm with the LIGhT/sET button.
• To deactivate the acoustic signals, use the MODE/MEM button to select
, and confirm with the LIGhT/sET button.
34
Fig. 6
,
Fig. 7