Displaying stored measurements
The device only stores measurements in forehead temperature mode
values from the last 60 measurements.
When 60 memory spaces are exceeded, the oldest value is deleted.
• The memory can be called up as follows:
• With the thermometer switched on, press and hold the MODE/MEM button for 5 seconds.
The most recent measurement is displayed.
• With each subsequent pressing of the MODE/MEM button, first the memory space number is displayed, fol-
lowed by the measurement when the button is released.
• In the upper line, the time and date are displayed alternately.
9. Measuring object temperature/room temperature
If you want to measure an object temperature with this thermometer, switch
to object temperature mode.
• With the thermometer switched on, briefly press the MODE/MEM button.
The device switches to the object temperature mode (Fig. 15).
• Hold the thermometer 2 to 3 cm from the measuring point. Briefly press the
sCAN button and read the temperature on the display (Fig. 16).
Measurements taken in object temperature mode are not stored.
. The device automatically stores the
38
Fig. 15
Fig. 16