Scope Of Supply; Product Overview (01) - AL-KO solo 6436 Traducción Del Manual Original De Instrucciones

Product description
Symbols are stamped on the machine for safe
operation and maintenance. It is important that
you heed these notes.
Symbol Meaning
Connection for refilling the fuel mix-
ture
Location: at the tank lid
Connection for refilling the chain oil
Location: at the oil tank cap
Press the engine switch; set the
switch to the "O" position – the en-
gine will be switched off immediate-
ly.
Location: On the left side of the
rear handle
Operating the air flap button: If you
pull out the button, the air flap clos-
es; if the air flap closes, press in the
button to open the air flap again.
Location: Air filter cover
Setting the oil pump: Using a screw-
driver, turn the rod in the direction
of the arrow until the MAX position
is reached for a stronger flow of
chain oil, or towards the MIN posi-
tion for a reduced flow of chain oil.
Location: Bottom of the drive unit
The screw under the "H" mark is
used to adjust the mixture at high
speed.
Location: On the top left side of the
rear handle
The screw under the "L" mark is
used to adjust the mixture at low
speed.
Location: On the top left side of the
rear handle
The screw above the "T" mark
serves to adjust the idle speed.
Location: On the top left side of the
rear handle
Indicates the direction in which the
chain brake is released (white ar-
row) or depressed (black arrow).
Location: Front side of the guide
rail
2500096_b
Symbol Meaning
Indicates the direction in which the
chain is mounted.
Location: Front side of the guide
rail
Guaranteed sound level: 113 dB(A)
2.6

Scope of supply

After unpacking, check that all the parts have
been delivered.
8
6
7
5
No. Component
1 Chain bar
2 Saw chain
3 Petrol chain saws
4 Protective cover of the guide rail
5 File
6 Screwdriver
7 Combination spanner
8 Operating instructions
2.7

Product overview (01)

No. Component
1 Chain bar
2 Saw chain
3 Front hand guard
4 Front handle
5 Air filter cover
6 Securing clips for air filter cover
7 Throttle lever
8 Safety locking switch
1 2
4
3
37