Chain Maintenance Table; Maintenance Schedule - AL-KO solo 6436 Traducción Del Manual Original De Instrucciones

Maintenance and care
1. Turn the "T" idling stop screw (11/5) clock-
wise a little until the engine runs smoothly.
If the optimum carburettor setting cannot be ad-
justed by turning the "T" idling speed stop screw,
have the carburettor optimally adjusted by an AL-
KO service station.
Chain type File diameter
91P053X
91P057X

8.11 Maintenance schedule

The following jobs may be carried out by the us-
er. All other work must only be carried out by a
specialist service centre.
2500096_b
Top plate an-
gle
Rotational an-
gle of the tool
5/32" 30°
5/32" 30°
Depth gauge setting

8.10 Chain maintenance table

WARNING!
Danger of serious injury.
Use of an unapproved saw chain or
guide rail on the chain saw can result in
serious injuries.
■
Use only approved saw chains and
guide rails.
The table shows the values for different chain
types.
Down angle Head tilt angle
(55°)
Inclination an- Side plate angle
gle of the tool
0°
0°
The following information relates to normal appli-
cation conditions. Under special conditions such
as working for a particularly long time, the speci-
fied maintenance intervals will have to be short-
ened accordingly.
Depth
gauge set-
ting
80° 0.025"
80° 0.025"
File
53