Technical Data - AGS IsoMatic 500 Instrucciones De Montaje

15

Technical data

Mains voltage
Standby
Protection category
Temperature range
Automatic safety cut-out
End-of-travel position
cut-out/power limit
Rated load
Pull and push force
Motor
Transformer
Connection
Special functions
Emergency release
Remote control
Door travel speed
Airborne sound emission
of the garage door
operator
Boom
TR10K009 RE / 02.2016
230 / 240 V, 50/60 Hz
Approx. 6 W
Only for dry rooms
–20°C to +60°C
Is automatically taught in for
both directions separately.
Self-learning, wear-free,
as it has no mechanical
switches.
Additionally integrated
travel time limit of
approx. 45 s
Readjusting automatic
safety cut-out for every
door run.
See data label
See data label
Direct current motor with hall
sensor
With thermal protection
Simple screw terminal
2
Max. 1.5 mm
For internal and external
buttons with impulse
operation
Operator light,
2-minute light
2-wire photocell
can be attached
Actuated with pull cord in the
event of a power failure
2-button hand transmitter,
RSC 2 (433.92 MHz)
Integrated radio receiver
with 6 memory spaces
approx. 10.5 cm/s (depending
on door size and weight)
The equivalent continuous
sound pressure level of 70 dB
(A-weighted) is not exceeded
at a distance of 3 metres.
Two-part
With maintenance-free,
patented toothed belt
ENGLISH
133