About These Instructions - AGS IsoMatic 500 Instrucciones De Montaje

ENGLISH
Contents
A Articles supplied ..................................................... 3
B Tools needed for fitting .......................................... 3
C Accessories ......................................................... 150
D Spare parts .......................................................... 152
E Drill stencil ........................................................... 153
1

About these instructions ........................................ 8

2 Safety instructions ......................................... 9
3 Fitting ..................................................................... 11
4 Initial start-up ........................................................ 60
5 Operator ................................................................. 78
6 Hand transmitters ................................................ 78
7 Integrated radio receiver ...................................... 79
8 Operation ............................................................... 79
9 Inspection and maintenance ............................... 80
10 Operator light messages ...................................... 81
11 Malfunctions and troubleshooting ...................... 81
12 Dismantling.......................................................... 128
13 Warranty Conditions ........................................... 132
14 Excerpt from the Declaration of Incorporation 132
15 Technical data ..................................................... 133
Dissemination as well as duplication of this document and the
use and communication of its content are prohibited unless
explicitly permitted. Noncompliance will result in damage
compensation obligations. All rights reserved in the event of
patent, utility model or design model registration. Subject to
changes.
8
Dear Customer,
We are delighted that you have chosen a quality product from
our company.
1 About these instructions
These instructions are original operating instructions
as outlined in the EC Directive 2006/42/EC.
These instructions contain important information on the
product.
Read through all of the instructions carefully.
▶
Please observe the information. Please pay particular
▶
attention the safety instructions and warnings.
Keep these instructions in a safe place for later reference!
▶
1.1 Further applicable documents
The following documents for safe handling and maintenance
of the door system must be placed at the disposal of the end
user:
These instructions
The instructions for fitting, operating, maintenance
and dismantling of automatic sectional doors
The enclosed log book
1.2 Warnings used
The general warning symbol indicates a danger that
can lead to injury or death. In the text section, the general
warning symbol will be used in connection with the caution
levels described below. In the illustrated section, an
additional instruction refers back to the explanation in the
text section.
Indicates a danger that immediately leads to death
or serious injuries.
WARNING
Indicates a danger that can lead to death or serious injuries.
Indicates a danger that can lead to minor or moderate
injuries.
ATTENTION
Indicates a danger that can lead to damage or destruction
of the product.
1.3 Definitions used
DIL switches
Switches for activating the operator functions. The switches
are located underneath the side flap of the operator cover.
Impulse sequence control
The taught-in radio code Impulse or a button triggers impulse
sequence control: With each push of the button, the door is
started against the previous direction of travel. Or the door
travel is stopped.
Power limit
Forces that are caused by the door hitting an obstacle are
limited to permissible values (EN 12453).
DANGER
CAUTION
TR10K009 RE / 02.2016