Foppapedretti Eureka Manual De Instrucciones página 135

Ocultar thumbs Ver también para Eureka:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 187
• ENGLISH •
MAINTENANCE
2. How to clean the harness buckle
Soak the buckle in warm water with washing-up liquid for at least an hour.
Rinse and dry thoroughly.
3. How to replace the harness buckle
Insert the metal ring and the crotch strap through the padding and the shell
The metal ring, fastened to the belt, must come out from the shell.
Pull the centre buckle to check that the crotch strap is correctly secured.
Fault
The tabs no longer fit into the appropriate slot in the buckle.
Solution
Unclip the buckle, pressing the red button.
6.2 Cleaning
When replacing the lining, only use the original FOPPAPEDRETTI ones, since
the lining is an important part necessary to ensure the protection of your
child.
The car seat must not be used without the lining.
The lining can be removed and washed with gentle detergent and in a cycle
for delicate fabrics (30°C). Follow the washing instructions on the label of
the lining. The colours of the lining may fade if washed at more than 30°C.
Do not spin or tumble dry (the fabric could be detached from the padding).
The plastic parts must be cleaned with soapy water. Do not use harsh
detergents (such as solvents).
The harness can be removed and washed with warm soapy water.
Warning! Never remove the tabs from the belts.
47

Publicidad

Tabla de contenido
loading

Tabla de contenido