Test Run (Fig. 6-1) - Mitsubishi Electric City Multi PMFY-P-VBM-E Serie Manual De Instalación

6. Test run (Fig. 6-1)

CENTRALLY CONTROLLED
CLOCK
CHECK
˚C
STAND BY
ERROR CODE
DEFROST
TEMP.
2
TIMER SET
PAR-20MAA
Fig. 6-1
BC
D
1Hr.
ON OFF
˚C
FILTER
CHECK MODE
E
TEST RUN
FUNCTION
NOT AVAILABLE
A
ON/OFF
5
FILTER
CHECK TEST
1
3 4
1 Press [TEST RUN] button twice → displaying [TEST RUN] on the screen.
2 Press [Selecting operation] button. → Check that wind is blowing out.
3 Press [Fan speed adjustment] button. → Check that the wind speed is changed.
4 Press [Up/down airflow selection] button to change wind direction.
5 Press [ON/OFF] button to clear test run. → Test run stops.
A Lighting in operation
B Displaying inspection code
C Displaying remaining test run time
D Displaying indoor unit's liquid pipe temperature
E Displaying test run
Note:
• The 2-hour-set timer is activated to automatically stop test run after two hours.
• The remote controller displays the temperature of the indoor unit's liquid
pipe on the temperature display section during test run.
9