Charge Battery; Fitting The Clipper-Head - Heiniger Saphir Basic C Instrucciones De Uso

6.1.2

Charge battery

Fig. 11
Fig. 12
1
3
2
3
Fig. 13
6.1.3

Fitting the clipper-head

Fig. 14
12
1. Test the contacts of the clipper (1)
and the battery (2) for foreign parti-
cles and contamination.
2. Assure, that the switch lever of the
clipper is in OFF-position ("0") (fig.
4).
3. Insert the battery (2) in the clipper
(3), until the battery interlock (1) is
engaged on both sides.
4. Insert the clipper with the inserted
battery (1) or insert just the battery
(2) from above without force into the
charging recess provided on the
charging station.
5. Waiting for the battery charging time
(3 specifications).
6. Battery is charging. During the
charging time the control light is il-
luminating red (3). As soon as the
battery has been charged to a min.
90%, the indicator lamp will change
to green and the charging station
switch to "trickle charging".
7. Hold the charger firmly with one
hand and pull the clipper (1) or the
battery (2) out with the other.
1. If the blade hinge (2) is accidental-
ly closed, lift the latter up using a
screwdriver (1) while simultaneously
pressing the blade lock.
Instruction manual / Small animal clipper