Operation Of Menu Types A, B, C, D - geberit HyTronic Instrucciones De Uso

The following information is displayed:
Unidirect
00 Back
10 Urinal
20 Tap
3
Go to desired menu item and press "OK" (in the
example [Urinal]). Aim HyTronic Service Handy at
sensor of control at a distance of 10 - 30 cm.
Within 8 seconds, go to [ON/OFF] [EIN/AUS] and
press "OK" until LED in sensor of control flashes
once (for urinal controls, aim Service Handy
slightly upward at sensor).
Urinal
00 ON/OFF
01 Back
02 Commands
4
Now settings can be made. Menu items are listed
by numbers. Go to desired menu item and press
"OK" (in the example [MainProgr] [Hauptmenü]).
24 CleanMode
30 MainProgr
31 Esaver
32 CleanEn
There are different types of menus that require
different operation. See "Operation of menu types
A, B, C, D".
5 When the settings have been made, end the
contact to the control. To do so, aim Service
Handy at sensor of control, go to [ON/OFF] [EIN/
AUS] and press "OK" until LED in sensor flashes
three times.
Urinal
00 ON/OFF
01 Back
02 Commands
If contact is not ended, control remains inactive for
ten minutes before it ends contact automatically.
6
Switch off HyTronic Service Handy.
HyTronic Service Handy, Unidirectional
Unidirekt
00 Zurück
10 Urinal
20 Armatur
Urinal
00 EIN/AUS
01 Zurück
02 Befehle
24 Reinigung
30 Hauptmenü
31 E Sparen
32 FreiReini
Urinal
00 EIN/AUS
01 Zurück
02 Befehle
Operation of menu types
A, B, C, D
Compare selected menu item with the following
examples and make desired settings.
Menu type A.
Select a function.
24 CleanMode
30 MainProgr
1 2 3
31 CleanEn
Open the menu item by pressing "OK". Pressing
"OK" causes output of current function through
LED signal. Select desired function and press
"OK". New function is written on control. New
function is indicated through LED signal as
confirmation.
Menu type B.
Enter a value.
41 IntFlshT
42 IntervalT
43 RunOnTime
Open the menu item by pressing "OK". Pressing
"OK" causes output of current value through LED
signal. Write desired value and press "OK". New
value is indicated through LED signal as
confirmation.
Menu type C.
Execute a program / command.
20 Valve
21 RangeTest
OK?
22 ResetSens
Open the menu item by pressing "OK". Pressing
"OK" causes the program / command to be
executed. Some programs can be stopped with
"OK".
Menu type D.
Display a counter.
50 Days?
51 Uses?
OK?
52 IntFlush?
Open the menu item by pressing "OK". Pressing
"OK" causes output of stored value through LED
signal.
Operation
24 Reinigung
30 Hauptmenü
1 2 3
31 FreiReini
41 IntervSpZ
42 IntervalZ
43 NachlaufZ
20 Ventil
21 TestErfas
OK?
22 ResetSens
50 SumBetrT?
51 SumBenut?
OK?
52 SumIntSp?
31
DE
EN
FR
IT
NL
ES
PT
DK
NO
SE
FI
IS
PL
HU
SK
CZ
SL
HR
SR
EE
LV
LT
BG
RO
GR
TR
RU
AE
CN
JP