Troubleshooting; Replacement Parts And Accessories - Hach LT 200 Manual Del Usuario

6. Start a temperature program of 100 °C for 60 minutes using the keys,
then push OK.
7. When the heating block is at the selected temperature (two beeps
are heard), the thermometer temperature should be the same as the
temperature shown on the display.

Troubleshooting

Refer to Table 5 for error messages, possible causes and corrective
actions.
Table 5 Error messages
Error
BLOCK IS TOO HOT! The temperature of the heating block is greater than the
selected temperature. Wait until the temperature of the
PLEASE WAIT
heating block decreases.
INIT ERROR The instrument is defective. Contact Customer Service.

Replacement parts and accessories

W A R N I N G
Personal injury hazard. Use of non-approved parts may cause
personal injury, damage to the instrument or equipment malfunction.
The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the
appropriate distributor or refer to the company website for contact information.
Replacement parts
Description
Protective cover
12 English
Solution
Quantity Item no.
1 LZT048
Accessories—DRB 200
Description
Reducing adapter, 20 > 16 mm
Reducing adapter, 16 > 13 mm
Tube, 16 x 100 mm
Tube, 16 x 100 mm
Thermometer, 0 to 200 °C
Quantity Item no.
1 HHA155
1 2895805
1 2275800
6 2275806
1 4565500