Samsung VP-W80U Manual De Instrucciones página 41

Tabla de contenido

Publicidad

ENGLISH
Advanced Shooting
7. Press ENTER.
The month setting will blink.
8. Turn the UP/DOWN dial to set
the desired month.
9. Press ENTER.
The day setting will blink.
10.You set the year, hours and
minutes by following the same
procedures used for setting the
year and month.
11. Press ENTER after setting the
minutes, the clock setting screen
will disappear.
The entered date and time will
then be displayed.
Recording a DATE/TIME
1. Make sure that you have set the
DATE/TIME.
2. Set the power switch to CAMERA
mode.
3. Press the DATE/TIME button.
To record the date only, press
the DATE/TIME button once.
To record the date and time,
press the DATE/TIME button twice.
4. Press the START/STOP button to start recording.
Notes:
If your date and time settings are not maintained in
the camcorder, it means the LITHIUM BATTERY is
discharged and should be replaced. (see page 17)
You cannot hide the recorded date or time during
playback.
The DATE/TIME function will not operate in EASY
or CUSTOM mode.
Filmación avanzada
7. Pulse ENTER.
CLOCK SETTING
Parpadeará el mes para ser
configurado.
0:00
8. Gire el disco selector UP/DOWN
1. JAN. 2005
para introducir el mes deseado.
EXIT: MENU
9. Pulse ENTER.
Parpadeará el día para ser
CLOCK SETTING
configurado.
10. Se pueden configurar el día hora y
0:00
1. FEB. 2005
minutos usando el mismo método
que el año y mes.
EXIT: MENU
11. Cuando se pulsa ENTER después
CLOCK SETTING
del proceso de introducción de los
minutos, desaparecerá la pantalla de
0:00
configuración del reloj y indicará la
1. FEB. 2005
fecha y hora seleccionados.
EXIT: MENU
Grabar una DATE/TIME
1. Asegúrese de que ha configurado la
DATE/TIME.
2. Ponga el interruptor de encendido en
modo CAMERA.
3. Pulse el botón DATE/TIME el tiempo
que desee.
Para grabar la fecha solamente, pulse una vez el
botón DATE/TIME.
Para grabar la fecha y la hora, pulse dos veces el
botón DATE/TIME.
4. Pulse el botón START/STOP para grabar la DATE/TIME
en su imagen.
Nota:
Si la fecha y hora configurada no se mantienen en la
videocámara, ello significa que la BATERÍA DE LITIO
está descargada. (Consulte la página 17)
Usted no puede ocultar la fecha u hora grabada
durante la reproducción.
La funcion DATE/TIME no funciona en EASY
o CUSTOM modos.
ESPAÑOL
41

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Vp-w80Vp-w87Vp-w87d

Tabla de contenido