Technical Specifications - Metabo KGS 303 Manual De Uso

ENGLISH
Machine lacks power
The saw blade is blunt and worn (possi-
bly has heat marks from overheating):
The saw blade you use is not suitable for
the material you are cutting (see chapter
15, "Technical Specifications",
install a proper saw blade);
Saw blade warped
Replace the saw blade as described
in chapter 9.1.

15. Technical Specifications

Voltage
Current draw
Fuse protection
Protection class
Degree of protection
Saw blade speed
Cutting speed
Saw blade diameter (outer)
Arbor bore
Dimensions
Machine in shipping carton
length / width / height
Machine ready to work, rotating table in 90° position, c/w suction port
length / width / height
Maximum work piece cross section
Standard cross cuts
width / height
Miter cuts (rotating table 45°)
width / height
Bevel cuts (track arm holder 45° left)
width / height
Compound miter cuts (rotating table 45° / track arm holder 45 ° left)
width / height
Weight
Machine in packing
Machine ready to work
Permissible ambient temperature for operation
Permissible temperature for transport and storage
Noise emission according to EN ISO 3744
Sound power level L
WA
sound pressure level at operator ear L
Effective value of weighted acceleration
(Vibration at handle)
Dust collector (not included in standard delivery)
Suction port diameter
Minimum air volume flow
Minimum vacuum at suction port
Minimum air speed at suction port
22
Saw vibrates heavily
Saw blade warped
Replace the saw blade as described
in chapter 9.1.
Saw blade incorrectly mounted:
and
Remove the saw blade and then
mount it again correctly by following
the steps outlined in chapter 9.1.
Saw squeals when starting
The drive belt is loose:
PA
Check, tighten or, if necessary,
replace the drive belt as outlined in
chapter 9.2.
Rotating table does not move at all or
is hard to turn
Saw dust has built up under the rotating
table:
Remove the saw dust as outlined in
chapter 9.7.
V 120 V (1~ 60 Hz)
amp 15
amp 20
IP 20
II
rpm 5200
fpm 13345
in. 10
in. 5/8
in. 31 1/2 x 23 1/2 x 18 1/2
in. 22 3/4 x 34 3/4 x 23 1/2
in. 11 7/32 x 3 3/16
in. 7 7/8 x 3 3/16
in. 11 7/32 x 2 1/8
in. 7 7/8 x 2 1/8
lbs 57.3
lbs 44
°F 32 to 104
°F 32 to 104
dB (A) 118
dB (A) 104
2
ft/s < 8.2
in. 1 1/2
cfm 323
psi 0.107
fpm 3937