Switching On - Stihl BGE 61 Manual De Instrucciones

Ocultar thumbs Ver también para BGE 61:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Strain Relief
To reduce the risk of disconnection of
the power supply cord from the
extension cord set during operation:
3
5
4
N
Make a loop in the extension cord.
N
Pass the loop (3) through the
opening (4).
N
Slip the loop over the hook (5) and
pull it tight.
N
Connect the extension cord plug to
a properly installed power outlet.
BGE 61, BGE 71

Switching On

N
Make sure you have a secure and
firm footing.
N
Hold the unit in the normal working
position.
1
BGE 61
N
Move the switch (1) to I.
BGE 71
N
Move the switch (1) to I or II.
I
= half power
II
= full power
Overload Circuit Breaker
The overload circuit breaker cuts off the
power supply to the unit in case of
mechanical overload. This can occur, for
example, if the blower wheel is blocked.
If the overload circuit breaker has cut
off the power supply:
N
Switch off the unit and disconnect
the plug from the power outlet.
N
Determine why the overload circuit
breaker has tripped and rectify the
problem.
N
Wait about 3 to 5 minutes for the
overload circuit breaker to cool
down – do not switch on the unit
during this period because the
cooling down time will otherwise be
much longer.
N
Connect the plug to the power outlet
and switch on the unit.
If the motor does not start when you
switch on, the overload circuit breaker
has not cooled down sufficiently.
English
13

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Bge 71

Tabla de contenido