Sanding Close To Edges; Dust Extraction - Festool PLANEX LHS 225 EQ Manual De Instrucciones

7- 1
7- 2
7
8
8- 1
8- 4
14
8- 2
8- 3

Sanding close to edges

The detachable brush segment allows you to re-
duce the distance between the wall/ceiling and
the side of the sanding pad.
 Press and hold the knob [7-1].
 Remove the brush segment [7-2].
 There is a retainer in the lid of the SYSTAINER
for storing the brush segment.
 Hook in the brush segment at the opposite end
to the knob [7-1], swivel towards the sanding
head and engage into position.

Dust extraction

CAUTION
Breathing in dust can damage the respiratory
passage!
 Always connect the machine to a dust extrac-
tor.
 When performing work that generates dust,
always wear a dust mask.
A Festool dust extractor with an extractor hose
diameter of 27 mm or 36 mm (recommended due
to the improved suction power) can be connected
to the extractor connector [8-2].
 The special extraction hose and special suction
sleeve [8-1] (available as an accessory) ensure
permanent attachment and protect against
kinking.
 Use the dust extractor CT 36 E AC-LHS on large
surfaces because this extractor guarantees the
permanent suction power required.
 Press the green button [8-4] to open the me-
chanical lock [8-3].
 Attach the extraction hose on the dust extractor
to the outlet spigot [8-2].
 Swivel the mechanical lock [8-3] upwards until
it engages.