Health Hazard By Dust; Technical Data; Functional Description; Intended Use - Festool PLANEX LHS 225 EQ Manual De Instrucciones

Health hazard by dust

Various dust created by power
sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known (to
the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
– Lead from lead-based paints,
– Crystalline silica from bricks and cement and
other masonry products,
– Arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these
chemicals work in a well ventilated
area and use approved safety equip-
ment, such as dust masks that are
specially designed to fi lter out mi-
croscopic particles. Wash hands after
handling.
T
INJURY, USER MUST READ INSTRUCTION
MANUAL.

Technical data

Power
Rotational speed
Sanding pad dia.
Abrasive dia.
Tool holder
Dust extractor connection dia.
Length of short version (without extension pipe)
Length of long version (with extension pipe)
Weight without cable
Short version
Long version

Functional description

The pictures for the functional description are on
a fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
10
O REDUCE THE RISK OF
340 – 910 rpm
215 mm (8.5'')
225 mm (8.9'')
36 mm (1.4'')
(27 mm (1.06''))
1.10 m (43.3'')
1.60 m ( 63.0'')
3.80 kg (8.4 lbs)
4.60 kg (10.1 lbs)
[1-1] Sanding head
[1-2] Extension pipe
[1-3] Speed control adjusting wheel
[1-4] On/off switch
[1-5] Suction power adjusting wheel
[1-6] Handle section
[1-7] Abrasive
[1-8] Mains power cable
[1-9] Insulated gripping surfaces (grey shaded
area)
The P L A N E X is designed for sanding primed
drywall constructions, ceilings and walls in inter-
nal and external applications as well as removing
carpet residue, coats of paint, coverings, adhe-
sives and loose plaster.
 We recommend using the Festool dust extrac-
tor CT 36 E AC-LHS when sanding large fi lled
surfaces, which generates large quantities of
dust.
ity for damage and accidents caused by improper
use.
550 W
Risk of accident if the machine is operated using
D 13/10
unauthorised voltages or frequencies.
 The mains voltage and the frequency of the
power source must correspond with the speci-
fi cations on the machine's name plate.
 In North America, only Festool machines with
voltage specifi cations of 120 V may be used.
Risk of burns!
Heating of the Plug it connection if bayonet fi t-
ting is not completely locked!
 Before switching on the power tool, make sure
that the bayonet fi tting at the mains cable is
closed fully and locked.
The switch [1-4] is an on/off switch (I = ON, 0 =
OFF). Connecting and detaching the mains power
cable [1-8], see Fig. [2].

Intended use

The user bears the responsibil-

Commissioning

WARNING
CAUTION