Playing Mp3/Wma/Aac Data (Play Mode); Sound (Beep) Guide Function; Turning Mute Mode On/Off (Int Mute); Setting The Aux Mode (V-Link) - Alpine CDA-9887 Manual De Operación

Mp3/wma/aac cd
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playing MP3/WMA/AAC Data (Play Mode)

CD-DA (Initial setting) / CDDA&MP3/WMA
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and the MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
CD-DA:
Only the CD data in Session 1 can be played
back.
CDDA&MP3/WMA: CD data, MP3/WMA/AAC files in mixed mode,
and multi-session discs can be played back.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first. (If you use an MP3 changer, you have to
change discs.)

Sound (Beep) Guide Function

Beep ON (Initial setting) / Beep OFF
This function will give audible feedback with varying tones depending
upon the button pressed.

Turning Mute Mode On/Off (INT Mute)

INT Mute ON / INT Mute OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.

Setting the AUX Mode (V-Link)

AUX IN ON / AUX IN OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX name display when AUX IN is set to ON.
Press
/
/ENT when AUX IN is set to ON, and select AUX Name
by turning the Rotary encoder, then press
After that, turn the Rotary encoder to select the desired AUX name.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/
then press BAND to select your desired device.

Changer Name Setting

Changer (Initial Setting) / USB / Portable
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M). You can set the name to be displayed on the unit
depending on the device to which the USB Adapter for MP3
(KCA-620M) is connected.

Setting the External Digital Input (Digital AUX)

Digital AUX ON / Digital AUX OFF (Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX to ON to enjoy 5.1-channel
surround sound.
• Press SOURCE/
, and select the D.AUX mode, and adjust the
volume, etc.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.

Connecting to an External Amplifier

Power IC ON (Initial setting) / Power IC OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
/
/ENT.
• No sound is produced by the system when the power output is set to

Setting the Language Font (Language Set)

to select AUX mode and
Language 1 (Initial Setting) / Language 2
You can select between two types of language fonts.

Demonstration

Demo ON / Demo OFF (Initial setting)
This unit has a Demonstration feature for the display with sound.
• To quit Demo mode, set to Demo OFF.
Power IC OFF : Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit's internal amplifier is
turned OFF and can not drive speakers.
Power IC ON :
The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
OFF.
Language 1 :
Normal Font
Language 2 :
European Font
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left
23
-EN

Publicidad

Tabla de contenido
loading

Tabla de contenido