Setting The Auxiliary Data Field Display; Ipod ® (Optional); Playback - Alpine CDA-9887 Manual De Operación

SIRIUS mode:
Category Name
Channel No./Channel Name
2
*
Composer Name
Song Name
(Blank)
(Blank)
Category Name
Channel No./Channel Name
1
* When ADF is turned OFF, this information is not displayed (see
"Setting the Auxiliary Data Field Display" on page 29).
Displayed in 1 line when text amount is small.
2
* When the "Scroll Setting" (page 24) is set to "Auto", the display
cannot be switched by pressing TITLE. The display contents switch
alternately.
3
* Displayed only during instant replay.
• When the "Scroll Setting" (page 24) is set to "Auto", the display
scrolls continuously. When the Scroll Setting is set to "Manual," the
display scrolls only once after any function is performed (PRESET,
BAND, SEARCH, etc.). "Channel No." and "Calendar/Clock"
displays do not scroll.
• Depending on the model, the display may differ from the one shown
above.

Setting the Auxiliary Data Field Display

The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold FUNC./SETUP for at least 2
seconds to select the SETUP selection mode.
2
Turn the Rotary encoder to select the TUNER
mode, and then press
Bluetooth GENERAL
*
TUNER Bluetooth
* Only when HD Radio/SAT Radio is connected.
3
Turn the Rotary encoder to select the XM ADF
mode, and then press
4
Turn the Rotary encoder to select XM ADF ON/
OFF, and then press
When setting to ON, Auxiliary Data Field is displayed by
pressing TITLE (Refer to the "Changing the Display" section
page 28).
5
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
• Pressing /RTN returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
2
*
Artist Name
Song Name
Channel No./Channel Name
Calendar/Clock
*
Channel Number/Channel Name
Remaining time of instant replay
/ /ENT.
AUDIO DISPLAY
/ /ENT.
/ /ENT.
®
iPod
Rotary encoder
/ /ENT
SOURCE/
3
/RTN
/ESC
®
An iPod can be connected to this unit by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-422i)
(sold separately). When this unit is connected by using the cable, the
controls on the iPod are not functional.
iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or iPod nano. iPod Shuffle cannot
be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guaranteed.
Fourth generation iPod: Ver. 3.1.1
Fifth generation iPod: Ver. 1.1.2
iPod photo: Ver. 1.2.1
iPod mini: Ver. 1.4.1
iPod nano: Ver. 1.2
• The unit cannot be used with software versions earlier than
"2006-06-28". For details about "iPod Software Update," refer
to the iPod Instruction Manual.

Playback

1
Press SOURCE/
TUNER XM/SIRIUS*
3
CHANGER* TUNER
1
* Only when XM Radio or Sirius Radio is connected.
2
* Only when the iPod is connected.
3
* Only when the CD changer is connected.
2
Press or
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold
3
To pause playback, press
/ /ENT
Pressing
• A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
(Optional)
4 5
Preset buttons
(1 through 6)
to switch to the iPod mode.
1 2
DISC iPod*
to select the desired song.
.
.
/ /ENT.
again will resume playback.
6
TITLE
29
-EN