European Atex Approval; Product Date Code; Earlier Version Date Code; Later Version Date Code - Mettler Toledo IND560 Serie Guia De Instalacion

IND560xx Terminal Division 2 and Zone 2/22 Installation Manual
NOTE: While the IND560xx with IDNet interface has been given a non-
sparking approval, at this time no METTLER TOLEDO High Precision IDNet
bases are approved for use within an area rated as Division 2 or Zone 2/22
in the United States or Canada.

European ATEX Approval

Some models of the IND560xx terminal have been certified as Category 3 by
DEMKO and issued a Type Examination Certificate DEMKO 07ATEX0514991 X.
This authorizes METTLER TOLEDO to mark the terminal as:
Harsh:
Panel:
A special condition listed in the ATEX approval of the harsh enclosure IND560xx
terminal is that ATEX certified, increased safety hole plugs and glands be used in
the installation. Refer to Figure 2-2 for examples of the ATEX-certified increased
safety "e" glands and plugs.

Product Date Code

The product date code for the IND560xx terminal can be found on the serial data
plate (either on the top of both the panel-mount and harsh enclosures, or inside
the enclosures).

Earlier Version Date Code

At the end of the serial number, there will be two letters (for example, 1234567-
6KJ.) The last letter in the serial number is the year of manufacture (the letter "J" in
our example). Refer to the date code chart in Figure 1-1 to decode the letter.

Later Version Date Code

The serial number will begin with a letter and a number (for example
B212000371). The letter represents the first three digits of the year per the date
code chart in Figure 1-2 (the letter "B" in our example represents "201x") and the
1-4
II 3 G Ex ic nA [ic] IIB T4 Gc -10°C ≤ Ta ≤ +40°C
II 3 D Ex tc IIIC T85°C Dc IP65 -10°C ≤ Ta ≤ +40°C
II 3 G Ex ic nA [ic] IIB T4 Gc -10°C ≤ Ta ≤ +40°C
II 3 D Ex tc IIIC T85°C Dc IP65 -10°C ≤ Ta ≤ +40°C
Date Date
Year
Code Code
J 2007
K 2008
L 2009
Figure 1-1: Earlier Date Code Formats
Year
M 2010
N 2011
P 2012