Playing Back A Disc; Start Play; Playing Back From The Usb Memory Or Digital Audio Player - JVC UX-G45 Manual De Instrucciones

To tune in to a preset station
1
Select a band (FM or AM).
2
Select a preset number for the station you store.
1 3
2
4 5 6
7 8 9
0
10

Playing Back a Disc

This System can play back the following discs—regular CD
and CD-R/CD-RW (recorded either in the audio CD or MP3
format).
Disc Type
Audio CD
CD-R
CD-RW
• Caution for DualDisc playback
The Non-DVD side of a "DualDisc" does not comply with
the "Compact Disc Digital Audio" standard. Therefore, the
use of Non-DVD side of a DualDisc on this product may
not be recommended.
Main Unit
ONLY
To insert a disc
You can insert discs while playing another source.
To close the disc tray, press 0 again.
• When the disc tray is open, pressing CD 6 closes the tray
and the playback starts.
11
Remote
ONLY
FM AM
• You can also use the
PRESET UP or
PRESET DOWN.
Mark (logo)
To start: To pause:
To release, press again.
To select a track/group*
Increases the track/group*
numbers.
Decreases the track/group*
numbers.
* For details about the group selection, see "For MP3
playback" on page 12.
To locate a particular portion
While playing a disc, press and hold until the portion you
want is reached.
Fast-forwards the track.
Fast-reverses the track.
No sound is played during this operation on MP3 sources.
To locate a track directly and

start play

Examples:
To select track number 5, press 5.
1 3
2
To select track number 15, press
4 5 6
To select track number 30, press
8 9
7
(For MP3 sources with 100 or
0
10
more tracks)
To select track number 125, press
* For up to 99 tracks, you can press
Playing Back from the USB Memory or
Digital Audio Player
This System is equipped with a USB MEMORY terminal on
the front panel. You can connect your USB Memory or
Digital Audio Player (DAP) to this terminal and enjoy the
sound out of your USB Memory or DAP.
• Remember you cannot send any signal or data to your USB
Memory or DAP from this System.
To stop:
Remote
ONLY
10 → 1 → 5.
10 → 3 → 0.
10 twice → 1 → 2 → 5.
10 twice to turn to the
condition before 10 is pressed.