Specifications - Nikon Laser 550A S Manual De Instrucciones

Operational Summary
Jp
When 『 』and『 』symbols do not appear, Limited
En
mode is switched to Full mode.
Fr
Note） If buttons are not pressed in the correct order,
switching will not take place.
Es
Note） This mode change can also be confirmed when
Pt
switching the measurement/display mode.
4. Release buttons.
8. Switching Target priority modes (Factory default setting is
First Target Priority mode.)
First Target Priority Distant Target Priority
[ ]
[ ]
1. LCD panel should be on.
2. Press and hold button, then depress and hold
button within 0.5 second.
Note） If the button is not pressed within 0.5
second, the display unit (m/yd) will be switched.
3. Continue to press and hold both buttons (more than 2
seconds) until First Target Priority mode and Distant Target
Priority mode are switched.
Note: If buttons are not pressed in the correct order,
switching will not take place.
Note: If switching fails to take place, repeat 2.
4. Release buttons.
Note: Because Target Priority mode is not displayed
while Angle mode is set, switching is made but
visual confirmation is impossible. Switch to another
measuring mode for confirmation.
44
[Deciding which Target Priority to use]
When obtaining different results from a single measuring
operation, the Nikon Laser 550A S will display the distance to the
farthest target on the LCD panel when using Distant Target Priority
mode, while First Target Priority mode will show the range to the
nearest target.
ex.) When measuring a tree standing in front of a house;
Tree Fence House
Distance to Target
115m 123m 128m
"115m" (distance to the tree) will be displayed in First Target Priority
mode, and "128m" (distance to the house) in Distant Target Priority
mode. First Target Priority mode, for example, has applications for
golf, while Distant Target Priority is useful when hunting in heavily
wooded areas.
9. Low battery indication
Flashing indicates that the battery power is low and
battery should be replaced. (See "Changing Battery")

Specifications

Measuring system
Measuring mode display Linear distance
Horizontal distance
Height
Angle
Vertical separation (height between two points ): Hgt + Hgt2
Measuring distance/ angle Distance: 10-500 meters/11-550 yards
± 89°
range Angle:
Distance- Act
angle (Linear distance)
Display
Hor
steps
(Horizontal distance)
Hgt
(Height)
Ang (Angle)
Linear distance
Horizontal dist.
Height
Angle
System First Target Priority/Distant Target Priority switching system
Optical system
Type Roof-prism monocular
Magnification (x) 6
Effective diameter of objective ø21
lens (mm)
Angular field of view (real) (˚) 6.0
Eye relief (mm) 18.2
Exit pupil (mm) ø3.5
Dioptre adjustment ±4m
-1
Others
Operating temperature (˚) -10 — +50
: Act
: Hor
: Hgt
: Ang
0.5 meter/yard ( ＜ 100 meters/yards)
1.0 meter/yard ( ≧ 100 meters/yards)
0.2 meter/yard ( ＜ 100 meters/yards)
1.0 meter/yard ( ≧ 100 meters/yards)
0.2 meter/yard ( ＜ 100 meters/yards)
1.0 meter/yard ( ≧ 100 meters/yards)
0.1° ( ＜ 10°), 1.0°( ≧ 10°)
0.5 meter/yard
0.2 meter/yard
0.2 meter/yard
0.1°
Jp
En
Fr
Es
Pt
45