Nikon Laser 550A S Manual De Instrucciones página 26

Operation and internal display
Jp
【3】 Linear distance mode
En
Fr
Operation/Results Work
Es
Pt
3 Measurement with Linear distance mode
3-1 Seeking your target Linear distance
(Align the reticle with target)
3-2 Measurement With the POWER button depressed,
(Laser irradiate symbol continuous measurementis possible for
is displayed.) up to 20 seconds.
(When done, 3-3 display appears.)
3-3 Failure to measure Repeat step 3-1.
3-4 Measurement OK Linear distance
Follow by 3-5 or 3-.1
3-5 Data display after (1) Horizontal distance【4】
witching modes
(2) Height (from horizontal)【5】
Switching the measurement
(3) Angle (from horizontal)【6】
unit changes it for each
mode. The POWER button can
(4) Vertical separation
be used to measure in each
(height between 2 points)【7】
mode.
(5) Linear distance
The angle and vertical
Return to 3-5-(1) and repeat.
separation (height between
two points) are displayed (In Limited mode, return to 3-5-(1),
when set at FULL mode.
then repeat ( 1),(2) and (5))
Limited mode shows linear
distance, horizontal distance
and height.
Regardless of process, after 30 seconds
8
Power off
since your last operation, power turns off. without operation
50
Display examples
Button Display
meter yards
Elevation(°) Depression(° )
POWER
206 225
MODE 201 220
MODE 45.0 49.2
MODE 13 -13
MODE
blinks
MODE 206 225
MODE
30 seconds
【4】 Horizontal distance mode
Operation/Results Work
4 Measurement with horizontal distance mode
4-1 Seeking your target Horizontal distance
(Align the reticle with target.)
4-2 Measurement With the POWER button depressed,
(Laser irradiate symbol continuous measurementis possible for
is displayed.) up to 20 seconds.
(When done, 4-3 display appear)
4-3 Failure to measure Repeat step 4-1.
4-4 Measurement OK Horizontal distance
Follow by 4-5 or 4-1.
4-5 Data display after (1) Height (from horizontal)【5】
switching modes (2) Angle (from horizontal)【6】
Switching the
Vertical separation
(3)
measurement unit
(height between two points)【7】
changes it for each mode.
The POWER button can be
(4) Linear distance【3】
used to measure in each
mode. (5) Horizontal distance
Return to 4-5-(1), then repeat.
The angle and vertical
(In Limited mode, return to 4-5-(1),
separation (height
then repeat (1), (4) and (5))
between two points) are
displayed when set at
FULL mode. Limited mode
shows linear distance,
horizontal distance and
height.
Regardless of process, after 30 seconds
8
Power off
since your last operation, power turns off.
Display examples
Button Display
meter yard
Elevation (°) Depression(°)
POWER
201 220
MODE 45.0 49.2
MODE 13 -13
MODE blinks
MODE 206 225
MODE 201 220
MODE
30 seconds
without operation
Jp
En
Fr
Es
Pt
51