How To Use The Rangefinder Case - Nikon Laser 550A S Manual De Instrucciones

Troubleshooting/Repair
Jp
En
Symptom
Fr
• Replace battery.
Es
Measurement result is
• Be sure that the target shape and condition is appropriate
unstable
Pt
to reflect the laser beam.
• Be sure to hold the unit steady while depressing the
POWER button.
• Be sure that nothing, such as leaves or grass, is between
the Nikon Laser 550A S and the target.
• Replace battery.
Incorrect result is
• Be sure that the target shape and condition is appropriate
displayed
to reflect the laser beam.
• Be sure that nothing, such as leaves or grass, is between
the Nikon Laser 550A S and the target.
If problems persist after consulting the Troubleshooting Table, please contact your local dealer to check/repair the
Laser 550A S . Never let anyone than the official representative of the product manufacturer check or repair the
550A S . Failure to follow this instruction could result in injury, or damage to the product.
58
Check Points
Nikon
Nikon Laser

How to use the Rangefinder case

Regular case
Upper flap
Lower flap
②
①
Case with belt loop
Belt
Upper flap
Lower flap
1) Open the lower flap and divide into its
two parts. ①
2) Attach the tip of the upper flap to the
lower flap. ②
3) Secure the upper flap by clipping
together the two parts of the lower
flap. ③
③
Jp
En
Fr
Es
Pt
59