Specifications
Jp
Power source
En
Dimensions (L x H x W)
Fr
Weight
Es
Structure
Pt
(Battery chamber: Water resistant**)
Safety
EMC
Environment
Laser
Class
Wavelength
Pulse duration
Output
Beam divergence
Operating humidity
* Waterproof models
The Nikon Laser 550A S is waterproof, and will suffer no damage to the optical system if submerged or dropped in water to a
maximum depth of 1 meter for up to 10 minutes.
The Nikon Laser 550A S offers the following advantages:
• Can be used in conditions of high humidity, dust and rain without risk of damage.
• Nitrogen-filled design makes it resistant to condensation and mold.
Observe the following when using the Nikon Laser 550A S.
• The unit should not be operated nor held in running water.
• Any moisture should be wiped off before adjusting movable parts (eyepiece, etc.) of the Nikon Laser 550A S to prevent damage and
for safety reasons.
To keep your Nikon Laser 550A S in excellent condition, Nikon Vision recommends regular servicing by an authorized dealer.
** The battery chamber is water resistant, not waterproof. Water may enter the device if the Nikon Laser 550A S is submerged in water.
If water enters the battery chamber, wipe out any moisture and allow time for the chamber to dry.
46
CR2 lithium battery x 1 (DC 3V)
Auto power shutoff function equipped (after approx. 30 seconds)
117x69x45 mm
Approx. 210g (without battery)
Body: Waterproof
(maximum depth of 1 meter for up to 10 minutes)*
Class 1M Laser product (EN/IEN60825-1:2007)
FCC Part15 SubPartB class B, CE:EMC directive, C-tick, VCCI class B
RoHS, WEEE
EN/IEC Class 1M
870 nm
14 ns
15W
Vertical: 25° — 36°, Horizontal: 5° — 8°
80% RH (without dew condensation)
External display
[Power On]
After the power is turned on, the internal
and external LEDs are illuminated until
either the POWER or MODE button is
pressed.
[Power off notice]
If 30 seconds pass without operation,
the power turns off. Approx. one second
before power turns off, this screen is
displayed.
1 Point Measurement
[Results]
After measurement, all data "linear
distance, horizontal distance, height and
angle" are displayed. Units can be shown
in meters or yards. Angles are indicated
by °(degree).
[ m ] : meter
[ YD ] : yards
Linear distance
Horizontal distance
Height
Angle
Unit
[While measuring]
When the target is upward
When the target is downward
[Measurement unsuccessful or unable to measure]
When the target is downward
When the target is upward
With negative values,
the "– (minus)" symbol is not shown.
[Measurement complete]
When the target is upward
When the target is downward
Jp
En
Fr
Es
Pt
47