Tabla De Contenido; Safety Rules; General Power Tool Safety Warnings - Festool TRION PS 300 EQ Manual De Instrucciones

Contents
Safety rules .................................................... 3
General Power Tool Safety Warnings .............. 3
Specific Safety Rules ........................................ 4
Technical data ................................................. 5
Symbols .......................................................... 5
Functional description .................................... 5
Use for intended purpose ............................... 5
Electrical connection and operation ............... 5
Extension cord ................................................. 6
Tool settings ................................................... 6
Electronic control ............................................ 6
Pendulum stroke ............................................. 6
Adjusting the base runner .............................. 7
Fitting the splinterguard ................................. 7
Fitting the chip guard ...................................... 7
The chip extractor ........................................... 8
Adjusting the sawblade guide ......................... 8
Changing the sawblade ................................... 8
Working with the tool ...................................... 8
Metalworking ................................................... 8
Free hand according to the scribe mark ........ 9
Plunge cutting without pilot drilling ............... 9
Accessories, tools ........................................... 9
Festool guide system FS ................................. 9
Parallel guide .................................................. 9
Circle cutter .................................................. 10
Systainer ........................................................ 10
Maintenance and care ................................... 10
Warranty ....................................................... 11

Safety rules

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
teryoperated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate condi-
tions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
fi nger on the switch or energising power tools that
have the switch on invites accidents.
3