Using The Plate Warmer; Cycle Status Indicators - Haier ESD300 Manual Del Usuario

To delay thestart
1.Close t hedoor.
2.Repeatedly press until y ousee thedesired h ours o fdelay inthe
display. ""
When t hedelay reaches 12hours, thedelay t urns off.Press Delay S tart again to
select a new number ofdelay hours.
3.Select a wash cycle andoptions.
NOTE: Tocancel thedelay andcycle, press Cancel. Tocancel thedelay andstart
thecycle immediately, press D elay S tart u ntil n ohours s how inthe
display.
USING
THE PLATE WARMER
Use the Plate Warmer option to warm serving dishes or dinner plates.
Note: Do not use the option with cycles.
1. Open the door
2. Press o , Plate Warmer glows.
3. Allow 8 minutes to heat the dishware.
CYCLES STATUS INDICATORS
Follow the progress of your dishwasher with the Cycle Status indicators.
Wt_!" /' l" lil,_
Wl:,,//ill£ S s_ _bls/s£ l}y {_ t.}/>;ll ",/_/ iz d A(/i_s_ i
O O O O O C) 0 0
Water Heated
Water Heated glows only when the cycle pauses to heat water to a set
temperature. Washing or rinsing continues as water is heated. Once water
reaches the set temperature, the light goes off and the cycle resumes.
Washing
Displayed during prewash and main wash periods.
Turbidity Sensor
Sensor glows during the sensing part of the cycle. Your dishwasher sense soil
level at the end of the Pre-Wash. Washing continues while Sensing occurs.
Rinsing
Displayed during rinse periods.
22