Home Position Adjustment - TECshow RAZOR 7R BEAM Manual De Usuario

6.3. Home Position Adjustment

Press MENU button into menu mode, then press ENTER but-
ton for about 3 seconds into offset mode to adjust the home
position. Select the function by ENTER button. Use UP and
DOWN button to choose the submenu, press the ENTER but-
ton to store and automatically return to the last menu. Press
MENU button to exit.
Pan—pan home position adjust
Enter offset mode, Select Pan, press ENTER button to con-
firm, the present position will blink on the display, use UP
and DOWN button to offset the value from -128 to 127, press
ENTER button to store. Press MENU button to exit.
Tilt—Tilt home position adjust
Enter offset mode, Select Tilt, press ENTER button to con-
firm, the present position will blink on the display, use UP
and DOWN button to offset the value from -128 to 127, press
ENTER button to store. Press MENU button to exit.
Shutter—Shutter home position adjust
Enter offset mode, Select Shutter, press ENTER button to
confirm, the present position will blink on the display, use
UP and DOWN button to offset the value from 0 to 255, press
ENTER button to store. Press MENU button to exit.
Color—Color home position adjust
Enter offset mode, Select Color, press ENTER button to con-
firm, the present position will blink on the display, use UP
and DOWN button to offset the value from -128 to 127, press
ENTER button to store. Press MENU button to exit.
Gobo—Gobo home position adjust
Enter offset mode, Select Gobo, press ENTER button to con-
firm, the present position will blink on the display, use UP
RAZOR 7R BEAM
ENGLISH VERSION
and DOWN button to offset the value from -128 to 127, press
ENTER button to store. Press MENU button to exit.
Prism—Prism home position adjust
Enter offset mode, Select Prism, press ENTER button to con-
firm, the present position will blink on the display, use UP
and DOWN button to offset the value from 0 to 255, press EN-
TER button to store. Press MENU button to exit.
R-Prism—Prism rotation home position adjust
Enter offset mode, Select R-Prism, press ENTER button to
confirm, the present position will blink on the display, use UP
and DOWN button to offset the value from -128 to 127, press
ENTER button to store. Press MENU button to exit.
Frost—Frost home position adjust
Enter offset mode, Select Frost, press ENTER button to con-
firm, the present position will blink on the display, use UP
and DOWN button to offset the value from 0 to 255, press EN-
TER button to store. Press MENU button to exit.
p. 15