Dmx Functions - TECshow RAZOR 7R BEAM Manual De Usuario

DMX Functions

Enter menu mode, select DMX Functions, press ENTER but-
ton to confirm, use UP and DOWN button to select DMX Ad-
dress, DMX Channel Mode or View DMX Value
DMX Address—DMX512 address setting
Select DMX Address, press ENTER button to confirm, the
present address will blink on the display, use UP and DOWN
button to adjust the address from 1 to 512, press ENTER but-
ton to store. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
DMX Channel Mode—channel mode
Select DMX Channel Mode, press ENTER button to confirm,
present channel mode will blink on the display, use UP and
DOWN button to select Mode1 (15 channels mode) or Mode
2 (14channels mode) or Mode 3 (18 channels mode), press
ENTER button to store. Press MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
View DMX Value
Select View DMX Value, press ENTER button to confirm. Chan-
nel function and its value will show on the display, use UP
and DOWN button to view other DMX value. Press MENU but-
ton back to the last menu or let the unit idle one minute to
exit menu mode.
RAZOR 7R BEAM
ENGLISH VERSION
WDMX Setting—wireless control setting
(For the unit with wireless receiver built-in only)
Select WDMX Setting, press ENTER button to confirm. Use UP
and DOWN button to select Active, Retransmit or Reset Memo-
ry, press ENTER button to store. Press MENU button back to the
last menu or let the unit idle one minute to exit menu mode.
Active
Select Active, press ENTER button to confirm, use UP and
DOWN button to select Yes (wireless control available) or No
(wireless control unavailable), press ENTER button to store.
Press MENU button back to the last menu or let the unit idle
one minute to exit menu mode. (Set wireless control to be
available, the power indicate LED will strobe)
Retransmit
Select Retransmit, press ENTER button to confirm, use UP
and DOWN button to select Yes or No, press ENTER button to
store. Press MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
Reset Memory
Select Reset Memory, press ENTER button to confirm, use UP
and DOWN button to select Yes (refuse wireless signal) or No,
press ENTER button to store. Press MENU button back to the
last menu or let the unit idle one minute to exit menu mode
.
p. 11