Add Engine Oil And Fuel - Briggs & Stratton 020228 Manual Del Propietário

Section 3: Assembly
2. Insert carriage bolts through holes from outside of unit
and attach a phstic knob from inside of unit (Figure 2).
Tighten by hand.
3. Place accessory tray over holes on handle (viewing
from front of unit). Pushthe tree clips into the holes
until they sit fiat against the accessory tray (Figure 3).
4. Insert multi-colored Pro]ectPro TMnozzles and other
supplied accessories in spaces provided in accessory
tray. See "How to Use AccessoryTray'.
Add Engine Oil and Fuel
° Place pressure washer on a [eve[ surface.
• Refer to engine manual for oil and fuel fill information.
• Damage to equipment resulting from failure to follow this
instruction will void warranty,
" Refer to engine owner's manual and follow oil and fuel
recommendations and instructions.
NOTE: Check oil often during engine break-in. Refer to
engine owner's manual for recommendations.
O