Tunturi C40 Manual Del Usuario página 4

REAR SUPPORT
Push the stand feet to the rear support ends and attach
the rear support to the main frame with two bolts,
washers and locking sleeves.
FRONT FRAME TUBE
Remove the rubber band from around meter cable
coming from the frame tube. Attach the meter cable
to the connector coming from the front frame tube.
Push the front frame tube inside the frame tube: do not
damage the meter cable! Attach the front frame tube
tight to the frame with the washers and attachment
screws.
4
FOOTRESTS
Attach the footrests to the position of your choice
on the pedal shafts with two screws, two washers /
screw and locking nuts.
ARMS
Push the metal shaft through the bracket housing
of the left arm. Attach now the left arm to the
front frame tube by pushing the metal shaft
through the opening in the tube. Push the right
arm on the shaft and lock it by tightening a large
washer, a locking sleeve and a screw to the both
ends of the shaft. Tighten the arms using two Allen
keys.