Transport And Storage; Technical Specifications - Tunturi F20 Manual Del Usuario

may occur in the equipment. In most cases it's
unnecessary to take the whole device in for repair,
as it's usually sufficient to replace the defective part.
If the equipment does not function properly
during use, contact your Tunturi dealer
immediately. Always give the model and serial
number of your equipment. Please state also the
nature of the problem, conditions of use and
purchase date.
If you require spare parts, always give the model,
serial number of your equipment and the spare
part number for the part you need. The spare part
list is at the back of this manual. Use only spare
parts mentioned in the spare part list.

TRANSPORT AND STORAGE

Move the cycle according to the following
instruction, because lifting the cycle incorrectly
may strain your back or cause other risk of
accidents:
Stand behind the cycle.
1.
Grip the seat with one hand and the handlebar
2 .
with the other and set your foot on the rear
support.
Tilt the cycle so that it rests on the
3 .
transportation wheels and the cycle by wheeling it.
Lower the cycle while holding on to the
4 .
handlebar and remaining all the time behind the
cycle.
Please protect the floor when moving the
N O T E !
device.
To prevent malfunctioning of the cycle, store in
a dry place with as little temperature variation as
possible, protected from dust.

TECHNICAL SPECIFICATIONS

Length .........................
Width ........................
Height ........................
Weight .......................
The Tunturi model F20 meets the requirements
of the EU's EMC Directives on electromagnetic
compatibility (89/336/EEC). This product
therefore carries the CE label.
The Tunturi model F20 meets EN precision and
safety standards (Class HB, EN-957, parts 1 and
5).
Due to our continuous policy of product
development, Tunturi reserves the right to change
specifications without notice.
8
110 cm
60 cm
138 cm
32 kg
The instructions must be followed carefully
N O T E !
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage
due to negligence of the assembly, adjustment
and maintenance instructions described herein.
Changes or modifications not expressly approved
by Tunturi Oy Ltd will void the user's authority to
operate the equipment!
We wish you many enjoyable trainings with
your new Tunturi training partner!