Transport And Storage; Maintenance - Tunturi E60 Manual Del Usuario

Ocultar thumbs Ver también para E60:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
The
display will start to flash. Choose the
3 .
TIME
desired duration of workout by using the arrow
keys (10-90 minutes in steps of 5 minutes). Press
The equipment uses this value to calculate
ENTER.
the duration of the different effort levels during the
program.
Enter your weight by using the arrow keys
4 .
(default value 70 kg in the
display reads
. Press
KG
ENTER.
Begin your workout. If the set heart rate value
5.
seems too strenuous or easy, change the heart rate
value by using the arrow keys. The display shows
the present heart rate level.
Programs can be saved in the memory of the
console.
M EM ORY FUNC TI ON
The console enables saving of 8 manually made
programs to its memory.
S AVI NG T HE PR O G RAMS
When you wish to save a program in the memory
of the console, press the
MEMORY
workout session. Choose the desired memory
location (P1-8) by using the arrow keys. Press
Your program is now saved in the memory
ENTER.
of the console.
A total of 32 changes can be
N O T E !
saved in each profile. To save a profile, you need to
exercise for 10 minutes or more.
RU NNI NG TH E PR OG R AM S
When you want to use an earlier saved program,
1.
press the
key after the console has been
MEMORY
switched on or after pressing
Choose the desired program with the
2 .
key or arrow keys. Press
ENTER
The time display will start to flash. Choose the
3 .
desired duration of workout by using the arrow
keys (10-180 minutes in steps of 5 minutes,
default: last saved time). Press
Enter your weight by using the arrow keys
4 .
(default value 70 kg in the
display reads
. Press
KG
ENTER.
Begin your workout.
5.
If you wish, you can adjust the effort level
N O T E !
with the arrow keys during the training. If you
want to save these changes in the memory, press
the
key after your workout and choose the
MEMORY
desired memory location. Press
saving.
PAU SE
The values in a workout that has been interrupted
are saved in the memory of the user interface for
5 minutes, after which they are reset. You can
window). The
DISTANCE
key after your
RESET.
MEMORY
.
ENTER.
window). The
DISTANCE
to confirm
ENTER
O W N E R ' S M A N U A L
restart the interrupted exercise by pedaling within
5 minutes.
E RROR COD E S
The user interface will display information about
operational faults.
Err 2 Data communication problem
Remove the power cord from the power outlet,
wait for 1 minute and then restart. If the error
message does not disappear, please contact your
Tunturi dealer.
T R A N S P O R T A N D S T O R A G E
Please follow these instructions when carrying
and moving the cycle about, because lifting it
incorrectly may strain your back or risk other
accidents:
Always switch the power off and unplug
N O T E !
the power cord before you start moving the
equipment around!
Stand behind the equipment. Grip the seat with
one hand and the handlebar with the other, and set
your foot on the rear support. Tilt the equipment
so that it rests on its transport wheels. Wheel the
equipment to move it, on these transport wheels.
Lower the equipment while holding on to the
handlebar and remain behind the equipment all
the time.
Transport the equipment with
N O T E !
caution over uneven surfaces, for example over a
step. The equipment should never be transported
upstairs using the wheels over the steps, instead
it must be carried. We recommend that you use a
protective base when transporting the equipment.
To prevent the equipment malfunctioning, store in
a dry place with as little temperature variation as
possible and protected from dust.
M A I N T E N A N C E
The equipment requires very little maintenance.
Check, however, from time-to-time that all screws
and nuts are tight.
After exercising, clean the equipment with a
soft, absorbent cloth. Do not use solvents. Sweat
may cause corrosion: we recommend therefore that
you protect all metal surfaces outside the plastic
covers with teflon or car wax.
Never remove the equipment's protective casing.
The electromagnetic brake forms a magnetic
field that may damage the mechanism of a watch,
or the magnetic identification strip on a credit
or cash card, should they come into immediate
contact with the magnets. Never attempt to detach
G B
E 6 0
9

Publicidad

Tabla de contenido
loading

Tabla de contenido